On a post a week ago, we introduced how we produce drill bits at high level of precision and that we keep trying hard to catch up customers’ requests.

Technologies and passions behind Uchida paper drills

Today, as customers requests more “added-value” prints, we are getting more requests from printers for solutions to punch holes on various materials with different coatings. So the paper drills nowadays are used not only for papers, but also for plastic films, labels, synthetic sheets, lenticular sheets and so on.  Swing tags are the one of the typical applications that we are often asked for solutions.  As written before, more printers are aware that tags on-demand is a good business and a paper drill is an essential part.

If business cards on-demand makes money, why not swing tags?

Generally, valuable prints requires higher quality.  On the contrary, it is more difficult to finish such materials with high precision and less damage. For example, when punching on laminated sheets, strokes need to be not too long but not too short.  Short strokes cause burrs on surfaces of sheets and laminating films peeled away from the sheets.  Long strokes cause generating frictional heat, ending up with sheets stuck on each other.

To avoid such troubles, we offer “Teflon-coated” drill bits.  Teflon coating enhances the durability and smoothness of drill bits, helps drill bits punch holes with better quality especially on laminated sheets and labels.  Especially if you are using a high-end paper drill, which is capable to change the rotating speed of spindle, difference is significant when run at slower speed.

Thus, drill bits seem to be small pieces of metal but the high quality ones are actually made with full of technologies.  There are lots of techniques behind how they are made, and of course there are some tips to use them properly.

Drill bit

Mr. Tsubakihara, the director of Sakura Seiki gave us an advice.  “For longer lifetime of drill bits, we suggest to take the drill bits off the machine and to remove paper chips inside after use.  If the chips are left inside the drill bits, they absorb humidity and cause the rust.  Moisten chips also swell in the drill bits, and cause the chips clogging up when they are used the next time.  Please also ensure to resharpen drill bits when they are being dull. These can damage and shorten lifetimes of the drill bits.   As long as they are maintained properly, our drill bits keep quality at very high level and last long.”

If you are looking for solutions to punch beautiful holes smoothly on several materials, feel free to contact us for more information!

 

(Written by Yasto)

Facebooktwittergoogle_plusredditlinkedinmail

“Sell the hole, not the drill.” If you have ever worked in marketing or you are familiar to it, maybe you have heard of this phrase for hundreds of times. Some says that this is the essential of marketing, and other says it’s just a cliche.

Anyway, we have sold quite a large numbers of paper drills and drill bits as a manufacturer for a log time. If you look around, you may be able to find paper product with holes, such as documents ready to be bound in folders, paper bags and swing tags etc.. These are different materials and each have different diameter holes. So, it’s easy to say “hey, I need a hole on this pile of paper”, but printers would agree that it’s not always easy to get this job done properly.

37803944_s

Sakura Seiki, the one of the manufacturer plants for Uchida, started producing paper drills and drill bits in the 1970s’, and they know there are several different demands from the market. In general, customers want to punch “beautiful” holes “efficiently” on paper piles. When you look at drill bits, below factors need to be improved for better results .

1. Sharpness of blade : To punch holes on paper piles beautifully and easily.
2. Smoothness for both outer & inner surfaces : To prevent wastes clogging up inside and to prevent burrs and damages on papers.
3. Abradability – ease of resharpening, longer lifetime : To keep longer lifetime in good condition.

In order to improve each factor, drill bits have to be processed very accurately and there surfaces have to be as smooth as possible.

Uchida drill bits are made of special steel used for cutting tools, such as razor, scissors and knife, that has higher hardness and viscosity. The original material is a round column special steel stick. By using a CNC, both outer surface and caliber (inner surface) are lathed. As shown on the below drawings, the drill bit itself is tapered as it goes up to its base, while the caliber is tapered in opposite direction in order to prevent the wastes clogging up inside the bit. As a result, the thinnest part of the drill bit becomes as thin as 0.15mm, and this part must be evenly thin.

Insideofdrillbit

Inconsistency in thickness affects durability and lifetime of a drill bit. Even though this process is done by the machine, to keep certain accuracy, the machine itself needs to be highly accurate, carefully programmed and calibrated. Therefore in order to procedure truly high quality drill bits, Sakura Seiki installed a fully customized machine, specialized in processing drill bits. And to make sure that the machine is calibrated perfectly, drill bits are carefully inspected by skilled workers before delivery.

3N2A61483N2A6158

Back in the 1970s’, the quality of our drill bits were of course not as good as that for current ones. Some drill bits broke after some hundreds of strokes, but after all the trials and improvements, if used properly, our drill bits works perfectly even after 10,000 strokes. Plus, their enhanced technology invented the world smallest drill bit, which diameter is only 1.5mm. (This drill bit is used only for plastic. )

For these significant products and practices, the factory was awarded for its “Takumi” (craftsmanship) from Osaka city.

“Also, since Uchida developes and produces both paper drills and drill bits, we have tested enormous combinations of drills, drill bits and works. For example, manual stroke type drills such as VS-25 and VS-55 have to be easy enough for operator to stroke. Testing several combinations, such as various length, thickness and coating of drill bits in a wide range of drills with different rpm and stroking speed, analysing the results, improving drills and drill bits, and testing again. Since the beginning, we have kept this trial and error procedures circulating to find best practices.” Mr. Tsubakihara, the director of Sakura Seiki adds.

3N2A6166

Based on a lot of experience and passions, Uchida is proud to take a marketshare of 75% in Domestic (Japanese) market. Yes, we sell not only the drills to punch holes, and also experiences how smoothly our drills can do it!

To see more about our drills, check our portfolio.

(Written by Yasto)

Facebooktwittergoogle_plusredditlinkedinmail