USF-3100

Staple cartridge type booklet maker, Full automatic connection with Uchida UC-1100 Collator, Non-stop booklet making function

Brochure
  • Realise the highest speed in this class
    Realise the speed of 3,100 booklets per hour when using USF-3100 alone and 2,400 booklets per hour even when linked up to the UC-1100 collator. The production efficiency in booklet making work is thereby greatly improved.
  • Automatic recognition of paper size and setting of the paper guides
    On placing standard size of papers on UC-1100, USF-3100 automatically recognizes the paper size so as to automatically set the positions of the paper guides. Even if linked up to the collator other than UC-1100, the paper guides are automatically set up just by pushing the paper size button on the control panel in the semiautomatic mode.
  • Memory function for outer norm and special paper sizes
    Capable of storing and registering up to 4 kinds of outer norm and special paper sizes at the maximum.
  • User-friendly and easy-to-see control panel
    As the paper guide dimensions are displayed, it is easy to make a fine adjustment of the paper size.If a paper jam occurs, the location of occurrence is displayed on a jam map so that the paper can be immediately removed.
  • Prevents interruption of the work with an auxiliary ejection tray
    If a feed error of a double feed or an empty feed occurs when linked up to the collator, a collated papers to which the error occurred is ejected to the auxiliary paper ejection tray below. Even if a feed error thereby occurs, the system continues to run without interruption.
  • Manual feed tray
    When using a booklet maker alone, or in the case of the booklet making work for a small lot even if linked up to the collator, the booklet making work can be readily performed with the manual insertion slot in the upper part of the machine.
Type Automatic / semiautomatic size change
Format Saddle stapling & folding, corner stapling, side stapling
Staple cartridge 5,000 staples / cartridge
Number of heads 1 to 2 heads (2 heads are equipped as standard accessory.)
Speed 3,100 sets / hour (When it is independently run.)
2.400 sets / hour (When connected with a single tower of UC-1 100)
Stapling capacity 20 sheets of A3 paper (80g/m2), Flat clincher standard
Folding capacity 25 sheets of A3 paper (80g/m2)
Paper quality 60 to 160g/m2 (210g/m2 for a single cover sheet)
Paper size Max. : 328(W) X 457(L)mm
Min. : 182(W) X 257(L)mm {120(W) X 210(L)mm when optional guides for A4 & CD size is used.
Staple pitch 68, 128, 200, 260mm
Automatic paper size setting SR-A3(320X450mm) .A3 .A4 .A5
CD jacket
Manual paper size setting Up to 4 paper sizes can be stored in addition to automatic setting.
Detections Empty stapling, no staple, paper jam, paper detection at paper feed section, paper gate & paper ejection
Error indication paper jam, no staple, empty staple and feed error
Power source 110, 115. 230, or 240VAC/50 or 60Hz, Single phase
Power consumption 166W
Dimensions In operation : 1,015(W) X620(D) X 740(H)mm
When stored : 520(W)X620(D)X740(H)mm
Net weight 86Kg
Optional accessories & supplies Staple cartridge (5,000 staples/cartridge)
Manual feed guide
Machine base for other collators
lnterface kit for other collators
Side paper guides for corner stapling
Optional kit for small size papers (A5, 5.5″x8.5″ and CD jacket size)