UC-1100

Three roller friction feed system, Up to 3,600 sheets per hour, Criss-Cross stacker

Brochure

UCHIDA Collator UC-1100 efficiently collates a wide variety of papers at the maximum cost performance. The center feed system eliminates the need to re-position the booklet maker and trimmer each time the paper size is changed. You can now install the system in a permanent station. Naturally, UCHIDA’s reliable paper feed system, proven throughout the world, has been kept in the same precise structure as it is constructed. The UC-1100 can also be connected by signal with major booklet makers available in the market. It is suitable not only for professional printer applications but also for in-house printing, quick copy/ print shops, schools, and many other uses.

  • User-friendly operation panel
    The operation panel has been upgraded and redesigned to make work easier. It shows the status of operation in any operation mode. Also, errors and their locations are indicated for quick corrective action.
  • Detachable large feed tray
    The paper feed tray is easily detached to facilitate replacement of the feed roller and separator and removing jammed paper. It is designed longer to be able to load larger format paper, such as A3SR paper, without requiring an optional auxiliary tray.
  • Center feed tray
    The paper is set in the center position on the feed tray by the centering guides, which eliminates the need to re-position the booklet maker and trimmer when different size paper is loaded.
  • Quick setting of paper feed pressure
    The paper feed pressure lever is relocated on the outside of the UC-1100 so that it enables the operator to adjust the pressure level much easier. The paper feed and separator pressures can be adjusted easily and quickly without detaching the feed tray.
  • Stacking table for various paper sizes
    The stacking table was redesigned to stack small format paper, such as A5 paper, without attaching an auxiliary table. It alternately shifts direction in a crisscross pattern that can stack large sized stock, such as A3SR paper crisscross, more efficiently than conventional offset stackers.
  • Two collators can be linked
    Two UCHIDA UC-1100 collators can be linked via an optional transport unit, enabling their use in tandem for purposes of collecting a larger number of pages (maximum 20 sheets). The two machines can be used separately while connected.
  • Connection with booklet makers
    UC-1100 can be connected with the most major booklet makers in the market. They exchange error signals each other to stop operation of the other when it made an error. This minimizes paper waste.
Number of stations 10 stations (10 stations X 2 towers connectable)
Paper size Maximum size : 328 x 469 mm (A3SR)(12.9″ x 18.5″)
Minimum size : 95 x 150 mm (Post card)(3.8″ x 5.9″)
Paper quality 1st & 10th station 35 to 210g/m2
2nd to 9th station 35 to 160g/m2
Offset paper, copy paper, NCR paper
Speed 40 or 60 set/minute selectable (A4 paper)
Paper feed system Center feed with friction roller system
Station capacity 28mm (approx. 350 sheets of 64g/m2 paper) (1.1″)
Paper stacking system Straight or criss-cross stacking
stacking capacity 65mm (approx. 880 sheets of 64g/m2 paper)(2.6″)
Counter Both 4 digits addition and preset subtraction
Feed error detection Empty feed, paper jam, double feed, no paper
Other detection Stacker full, paper eject jam, back door open, station in use, paper check at each stastion, after processing unit error by signal relay
Programming mode Alternate collation mode
Insersion mode
Program insersion for slip booklet mode
Program insertion for front and back cover mode
Connection to booklet maker UCHIDA USF-3100
Power source 110, 117, 220, 230 or 240VAC, 50 or 60Hz
Power consumption 200W
Dimensions 545(W) x 740(D) x 1,056(H) mm(21.5″(W) x 29.1″(D) x 41.6″(H))
Weight 76Kg (167.5 lbs)
Standard accessories Paper feed table, Straight/Chriss-Cross stacker
Optional accessories Height Fixed collator table
Connecting cable with connector for booklet makers